Search for: All records

Abstract Strong and tough bio‐based fibers are attractive for both fundamental research and practical applications. In this work, strong and tough hierarchical core–shell fibers with cellulose nanofibrils (CNFs) in the core and regenerated silk fibroins (RSFs) in the shell are designed and prepared, mimicking natural spider silks. CNF/RSF core–shell fibers with precisely controlled morphology are continuously wet‐spun using a co‐axial microfluidic device. Highly‐dense non‐covalent interactions are introduced between negatively‐charged CNFs in the core and positively‐charged RSFs in the shell, diminishing the core/shell interface and forming an integral hierarchical fiber. Meanwhile, shearing by microfluidic channels and post‐stretching induce a better ordering of CNFs in the core and RSFs in the shell, while ordered CNFs and RSFs are more densely packed, thus facilitating the formation of non‐covalent interactions within the fiber matrix. Therefore, CNF/RSF core–shell fibers demonstrate excellent mechanical performances; especially after post‐stretching, their tensile strength, tensile strain, Young's modulus, and toughness are up to 635 MPa, 22.4%, 24.0 GPa, and 110 MJ m⁻³, respectively. In addition, their mechanical properties are barely compromised even at −40 and 60 °C. Static load and dynamic impact tests suggest that CNF/RSF core–shell fibers are strong and tough, making them suitable for advanced structural materials. 

Abstract Elastomers generally possess low Young's modulus and high failure strain, which are widely used in soft robots and intelligent actuators. However, elastomers generally lack diverse functionalities, such as stimulated shape morphing, and a general strategy to implement these functionalities into elastomers is still challenging. Here, a microfluidic 3D droplet printing platform is developed to design composite elastomers architected with arrays of functional droplets. Functional droplets with controlled size, composition, position, and pattern are designed and implemented in the composite elastomers, imparting functional performances to the systems. The composited elastomers are sensitive to stimuli, such as solvent, temperature, and light, and are able to demonstrate multishape (bow‐ and S‐shaped), multimode (gradual and sudden), and multistep (one‐ and two‐step) deformations. Based on the unique properties of droplet‐embedded composite elastomers, a variety of stimuli‐responsive systems are developed, including designable numbers, biomimetic flowers, and soft robots, and a series of functional performances are achieved, presenting a facile platform to impart diverse functionalities into composite elastomers by microfluidic 3D droplet printing.